5402 Manual Updated — Eppendorf

Never operate the centrifuge without a balanced rotor.

Set the desired temperature using the Temp button. For sensitive enzymes, pre-cool the unit.

is a refrigerated microcentrifuge known for its ability to maintain precise temperatures between eppendorf 5402 manual updated

If a tube breaks containing infectious agents, the operator must wait 30 minutes for aerosols to settle before opening the lid. Wear appropriate PPE. Decontaminate with a 1:10 diluted bleach solution or 70% isopropanol, ensuring the contact time does not corrode the aluminum rotor.

If your lab has been using an old paper manual or a first-generation PDF, here is a checklist of updates to implement immediately: Never operate the centrifuge without a balanced rotor

: Common error codes for this era of Eppendorf centrifuges (like Error 6 or Error 8) typically relate to motor/brake malfunctions or loose rotors. Centrifuge 5420 - Eppendorf

Clean the rotor chamber with a mild detergent or a 70% isopropyl alcohol solution at the end of every day. Avoid harsh bleach mixtures that can pit the stainless steel. is a refrigerated microcentrifuge known for its ability

As of 2026, Eppendorf no longer actively hosts the full 150-page original manual due to the model being "phase-out legacy." However, they provide a – a 22-page critical safety addendum. This is the definitive updated document.

| Code | Probable Cause from Community Reports | Suggested Actions | | :--- | :--- | :--- | | | Rotor not recognized or speed measurement system failure. | Check rotor is correctly installed and recognized by the centrifuge. | | Error 1 | Rotor identification failure. | Ensure rotor is properly installed; if issue persists, contact support. | | ERR 02 | Rotor imbalance or over-speed detection. | Ensure rotor is properly seated and loaded with balanced tubes. | | Error 3 | Incorrect speed measurement method. | Check speed sensor and its connections. | | Error A | Temperature sensor failure. | Requires sensor replacement; parts may be limited. |