Zxd 3000 User Manual 2021 [verified]
If an error persists after three power cycles, contact ZXD support with the error code and your unit’s serial number (located on the rear plate, format ZXD-21-XXXXX).
2 - ZXD3000 (V5.5) Rectifier Module User Manual | PDF - Scribd
For more detailed technical specifications or configuration steps, you can find the complete ZXD3000 Rectifier Module User Manual or the ZXDU3000 System Manual on platforms like Scribd. zxd 3000 user manual 2021
Push the module firmly until the backplane connector locks in. Tighten the locking screws.
The troubleshooting section is well-structured: If an error persists after three power cycles,
The ZXD 3000 is typically managed via a System Monitoring Unit (SMU) located in the power rack, rather than directly on the module itself. However, the faceplate provides vital status indicators:
| | Parameter | Value / Range | | :--- | :--- | :--- | | Basic Info | Manufacturer | ZTE Corporation | | | Model | ZXD3000 (V5.x / V6.0) | | | Type | Switching Rectifier / Power Module | | | Output Power | 3000 W | | AC Input | Rated Input Voltage | 200 V ~ 240 V | | | Wide Input Range | 75 V ~ 300 V (Adaptive) | | | Input Frequency | 50/60 Hz | | | Max Input Current | ~ 17A – 18A | | DC Output | Rated Output Voltage | 53.5 V | | | Output Voltage Range | 42 V ~ 59.5 V | | | Rated Output Current | ~ 50A – 63.5A | | Mechanical | Dimensions (H W D) | 132mm × 41.5mm × 300mm / 300mm × 40mm × 130mm | | | Weight | Approximately 2 kg | | | Cooling Method | Forced Air Cooling (Intelligent fan) | | Performance | Peak Efficiency | > 96% | | | Power Factor | PF ≥ 0.998 (at rated load) | | Environment | Operating Temp. | -33°C to +55°C (Full output: -5°C ~ +45°C) | | | Storage Temp. | -40°C to +70°C | | | Altitude | < 3000m | Tighten the locking screws
Regular maintenance is essential for the longevity of the ZXD 3000. The official user manual details specific maintenance tasks that must be performed routinely.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Slide the module smoothly out of the slot, supporting the bottom of the unit with your free hand. 4. System Commissioning and Parameter Configuration
The top line of the LCD now shows real-time: Temp: 38C | RPM: 1450 | Job: IDLE