Thyssenkrupp Levant Stair Lift Installation Manual Full [portable] Jun 2026

: Wireless remotes used to summon the lift from the top or bottom of the stairs. Main Switch

Rail brackets (also known as feet) anchor the lift directly to the stair treads, not to the wall.

: The motorized carriage (power pack) is slid onto the rail, and the seat and footrest are mounted and wired to the main unit. Safety Testing thyssenkrupp levant stair lift installation manual full

Insert the steel joining pins into the designated channels of the first rail section.

: Prepare the drive unit and drive it onto the rail. Grease the rail bearing surfaces with a brush to ensure smooth operation. Seat Assembly : Wireless remotes used to summon the lift

While many homeowners successfully install the ThyssenKrupp Levant themselves, may require a licensed technician for inspection. Improper installation can void warranties and pose a significant fall risk. If you encounter resistance or are unsure about the structural integrity of your stairs, consult a professional.

: A 25-page guide covering operation and basic safety is available at Manuals.co.uk StairliftRepair.com Installation Video Safety Testing Insert the steel joining pins into

Place the rail on the steps, ensuring a gap of approximately 5 inches (12 cm) between the rail and the wall. Step B: Secure the Mounting Brackets Attach the feet: Slide the mounting brackets onto the rail.

Attach the seat assembly to the carriage. The Levant manual will detail the specific bolts and safety mechanism for attaching the seat to the carriage.

Inspect the rail gear rack and lightly lubricate it with a thin layer of silicone spray or white lithium grease if dry. Do not over-grease.