Temperature Controller Manual Pdf: Stc-600

The is an all-in-one temperature controller designed primarily for refrigeration systems, featuring modes for refrigeration, defrosting, and fan control. Key Technical Specifications

Use the Up (▲) or Down (▼) arrow keys to scroll through the parameter codes (F0 to F6).

Press and hold the key for 3 seconds until the screen displays F1 . Stc-600 Temperature Controller Manual Pdf

The temperature differential. If the target is 5° C and the difference is 2° C, the compressor starts at 7° C and stops at 5° C.

Press the SET key for 3 seconds to enter the user-defined parameters. The temperature differential

For a full technical breakdown, you can refer to the official STC-600 Technical Manual PDF provided by How to program a STC-1000 temperature controller

: If configured for heating, the system activates when the temperature falls below the "Set Value" minus the "Difference Value". For a full technical breakdown, you can refer

The unit detects an open or short circuit in the temperature probe. Check the sensor wiring connection at terminals 3 and 4, or replace the NTC probe.