Always exercise caution with files from unofficial sources. Use a reliable antivirus program to scan any downloaded files before use.
Ensure the battery is charged to at least 70%, or keep it plugged into the wall charger.
Using the buttons on the device, navigate to the main . satlink ws-6908 software update
One expert notes that Chinese-made meters like the Satlink WS-6908 often have different internal components (like LCD screens) across the same model line, especially in OEM versions. Therefore, .
Press the designated green or yellow button (indicated on the bottom screen legend) to or Edit a satellite. Always exercise caution with files from unofficial sources
Turn the Satlink WS-6908. Your Windows PC should recognize the device and install the necessary virtual COM port drivers automatically. 3. Run the Upgrade Tool
Turn on the Satlink meter. Note that Windows may not immediately show a "New Hardware Found" notification; this is typical for these devices. 3. Software Configuration Open the upgrade software on your PC. It is recommended to Right-click > Run as Administrator to ensure full access to the COM ports. button within the software interface and navigate to the firmware file you downloaded earlier. Select the correct Using the buttons on the device, navigate to the main
Download the latest firmware file (usually a .bin or .ssu file) from a trusted source, such as the Satlink S.L. Device Database or satellite enthusiast forums .
Do not touch the cables or power off either device while the progress bar is running. The process typically takes 1 to 2 minutes.
Before attempting an update, check which software version is currently installed on your device.
Download the files as a .zip or .rar archive and extract them to a dedicated folder on your desktop. Phase 2: Connecting the Meter to Your PC