Satlink Ws-6906 Software Upgrade |link|

Once the transfer reaches 100%, the software will flash the chip. Wait until you see a "Upgrade Success" message. Step 5: Final Reboot Turn off the Satlink meter. Disconnect the RS232 cable.

Switch the power button on the Satlink WS-6906 to the position immediately. satlink ws-6906 software upgrade

Guide to Upgrading the Satlink WS-6906 Upgrading the firmware on a Satlink WS-6906 Once the transfer reaches 100%, the software will

: Running Windows OS (compatibility is highest on Windows 7, 8, or 10 in compatibility mode). Once the transfer reaches 100%

Click the appropriate button to write the parameters to the device.

: Right-click the SatlinkTools executable and select "Run as administrator" (especially on Windows 7, 8, or 10). Establish Connection : Turn on the finder.

Satlink WS-6906 Software Upgrade: The Complete Step-by-Step Guide