By following the guidelines outlined in this article, you can ensure that you get the most out of your laser cutting machine and achieve precise and accurate cuts every time.
When a new firmware version is released for your laser engraver, you can use MKS Laser Tool to update it. The process requires a firmware file (usually with a .bin extension). The steps vary slightly depending on your machine model, but the general procedure is:
Even with V1.1.2, users may encounter specific hurdles: Mks Laser Tool Setup V1.1.2.exe Download
Allow the program to run as an administrator if prompted.
If you encounter any issues during the download or installation process, here are some common troubleshooting steps to try: By following the guidelines outlined in this article,
The only drawback is that V1.1.2 does not support WiFi-connected MKS boards (e.g., TinyBee or MKS WiFi module). If you have a wireless setup, you need V1.2.5 or higher.
: Import and adjust internal machine settings without using a command terminal. 📥 Where to Download The steps vary slightly depending on your machine
You can download the official from Makerbase's verified GitHub repository. This tool is primarily used for configuring Wi-Fi, updating firmware, and managing images for Makerbase laser control boards like the Go to product viewer dialog for this item. . Official Download Sources