Hdl Buspro Setup Tool 2 |link| Jun 2026

Click the Search button. The tool sends a broadcast signal across the network. Devices will populate in a list, showing their current Subnet ID, Device ID, and model type.

Double-clicking any discovered device opens its specific configuration window. While every module (dimmers, relays, sensors, panels) has unique parameters, the programming logic remains uniform. 1. Relays and Dimmers (Actuators)

Do you need help with a specific task like or IP gateway configuration ? Share public link

Check the bus voltage; it should be around 24V DC. Ensure the IP Gateway is not in "Prog" mode. hdl buspro setup tool 2

The software functions as the centralized brain for system commissioning. Its primary operational pillars include: Buspro Gateway User Manual - HDL Automation

Map button modes: Choose between , Single On/Off , Combination On , Combination Off , or Short Press / Long Press .

: For complex integrations, the HDL Training Academy offers certification courses. Click the Search button

Located at the top of the interface, providing quick access to file operations (save, open project), connection parameters, system tools, and language preferences.

Whether you are configuring a luxury residential property, a commercial office space, or a large-scale hospitality project like the Morpheus Hotel in Macau, mastering this comprehensive utility is essential. Key Capabilities of HDL Buspro Setup Tool 2

: Quickly find online devices via Fast Search or Advance Search and modify their addresses and names. Relays and Dimmers (Actuators) Do you need help

Use the built-in packet sniffer to identify which device is generating high traffic and optimize its sensor broadcast intervals. Using the Command Monitor (Packet Sniffer)

Open the software and navigate to the . Select the network card connected to the HDL system. Ensure the "Local IP" matches your computer's current address. Once set, the software should show an "Online" status. 2. Device Search

Select the target button and choose its mode (e.g., Single On/Off, Combination, Dim Up/Down, Short Press/Long Press). In the , add a new line. Input the Subnet ID and Device ID of your output module.

Open your Wall Panel or Sensor configuration window in Setup Tool 2. Select the button or logic block you want to program.