: Restores a drive reading as "0 bytes" or "No Media" back to its true storage potential.
: If a red block appears with an error code (such as Write Configuration Error or Bad Block Overlap ), it indicates either a mismatch in your Flash Name settings or a drive with severe, unfixable physical hardware degradation. Try dropping down to a deeper Low Scan mode or selecting an older version of the software. Post-Recovery Verification
is the definitive factory flashing and recovery software designed to repair broken, corrupted, or counterfeit USB flash drives powered by FirstChip controllers. When a USB drive presents errors like "No Media," "0 Bytes," "Write Protected," or "Device Not Recognized," traditional Windows formatting tools fail because the underlying firmware is corrupted. Firstchip Chipyc2019 Mptools
: Scans the NAND flash memory, mapping out dead blocks so the computer avoids reading or writing to damaged cells.
If the drive is accessible, try to recover data first. MpTools will destroy all data on the drive. : Restores a drive reading as "0 bytes"
The tool will go through several steps (Erase, Mapping, Burn Firmware, Test). The progress bar will turn green upon success.
The is a specialized, powerful, and occasionally dangerous utility. For the average consumer, it is a last resort. For the IT professional, data recovery technician, or hardware enthusiast, it is an indispensable part of the toolkit. If the drive is accessible, try to recover data first
The FirstChip MpTools tool has been updated several times, each version addressing specific bugs and adding support for newer flash chips.