Before exporting, hide or delete the layer showing the card outline. If you leave it visible, the printer will print a thin black line around the perimeter of your physical card. Epson L805 Printer Driver Settings for PVC Cards
Searching online for a ready-made template can be frustrating. Many free templates are generic and not optimized for the L805’s specific 1mm bottom margin shift. Here are three reliable sources: epson l805 pvc card template psd
Change the paper source from Rear Paper Feed to . Step 3: Executing the Physical Print Wait for the Epson L805 Before exporting, hide or delete the layer showing
The Epson L805 is not a dedicated PVC card printer (like a Fargo or Magicard), so it’s (under 50 cards at a time) but not high-volume production. For best results, always print a test on plain paper to verify alignment before wasting expensive PVC sheets. Many free templates are generic and not optimized
The Ultimate Guide to Epson L805 PVC Card Printing: Free PSD Templates & Setup
Cards are typically CR80 standard (86 x 54 mm), matching ISO/IEC 7810 ID‑1 dimensions. For printing, most commercial and DIY operations use 85.5 x 54 mm with bleed at 88.5 x 57 mm.
Before exporting, hide or delete the layer showing the card outline. If you leave it visible, the printer will print a thin black line around the perimeter of your physical card. Epson L805 Printer Driver Settings for PVC Cards
Searching online for a ready-made template can be frustrating. Many free templates are generic and not optimized for the L805’s specific 1mm bottom margin shift. Here are three reliable sources:
Change the paper source from Rear Paper Feed to . Step 3: Executing the Physical Print Wait for the Epson L805
The Epson L805 is not a dedicated PVC card printer (like a Fargo or Magicard), so it’s (under 50 cards at a time) but not high-volume production. For best results, always print a test on plain paper to verify alignment before wasting expensive PVC sheets.
The Ultimate Guide to Epson L805 PVC Card Printing: Free PSD Templates & Setup
Cards are typically CR80 standard (86 x 54 mm), matching ISO/IEC 7810 ID‑1 dimensions. For printing, most commercial and DIY operations use 85.5 x 54 mm with bleed at 88.5 x 57 mm.