Epson engineers programmed a digital counter (the Waste Ink Pad Counter) into the printer's firmware. This counter estimates how much ink has been deposited into the pads. Once this counter hits 100%, the printer locks down completely, flashing red lights and displaying one of the following messages on your computer screen:
Forces a powerful initialization of ink through the tubes, useful after replacing parts.
Set the Model Name to and choose the exact USB Port your printer is connected to. Click OK .
: Resets the internal software counter that tracks ink usage to clear "end of service life" errors. Maintenance Tank Management Epson L6490 Adjustment Program
A pop-up message on your computer screen stating
A prompt will appear asking you to turn off the printer. Turn off the printer via its physical power button, click OK on the software prompt, and then turn the printer back on.
Related search suggestions (you may find these useful) Epson engineers programmed a digital counter (the Waste
: This software is officially intended for authorized service centers. While versions often circulate on the web, using them incorrectly can corrupt the printer's firmware or lead to hardware damage.
Scroll through the maintenance list and double-click on .
Check the boxes again, then click the Initialization button. Set the Model Name to and choose the
To download and install the Epson L6490 Adjustment Program, follow these steps:
Using the Epson L6490 Adjustment Program is relatively straightforward. Here's a step-by-step guide: