Epson L6460 Adjustment Program Install Jun 2026

Click the button. The software will read your printer's current page memory and display your usage percentage. If it reads 100%, your printer is locked.

Verify that you selected the L6460 profile and that the printer is powered on.

Prerequisites (bullet list)

Download a decompression tool like WinRAR or 7-Zip if you do not have one. epson l6460 adjustment program install

Close the program, open it again, and click "Check" to confirm the counter is now at 0% . Troubleshooting Communication Errors

Once the program is open, follow this sequence to reset the waste ink counter:

Once your files are extracted, follow these exact steps to reset your waste ink counter. Do not click on random buttons, as modifying other EEPROM settings can permanently corrupt your printer's firmware. 1. Launch the Program Open the extracted folder. Click the button

Once the software interface opens, click on the button at the top. In the Model Name dropdown menu, choose L6460 .

model from the model list. Make sure the USB port is detected.

Because these tools are not "signed" by Microsoft, antivirus software (including Windows Defender) often flags them as dangerous. You will need to temporarily disable antivirus software. Step-by-Step: Epson L6460 Adjustment Program Install Verify that you selected the L6460 profile and

Forces a deep ink priming cycle through the tubes and printhead.

This means the software cannot talk to the printer. Ensure your USB cable is securely connected, turn the printer off and on again, and make sure you explicitly selected the "USB" port in the program settings rather than leaving it on "Auto Selection."

Choose from the model list and select the correct Port (where the printer is connected).

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Many third-party adjustment tools are flagged as "false positives" by antivirus software due to how they interact with hardware ports. You may need to temporarily pause your security software to extract and run the tool. Step 2: Running the Software Calibration