Din 5464 Standard Pdf
The defines the precise specifications, geometries, and dimensional tolerances for straight-sided splines within the heavy-duty machinery series . Officially maintained by the German Institute for Standardization (Deutsches Institut für Normung) , the most up-to-date, active revision of this technical document is DIN 5464:2010-03 . Mechanical engineers, automotive designers, and industrial manufacturers heavily rely on this framework to establish dependable, highly rigid shaft-hub connections capable of handling severe torsional loads.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. DIN 5464 - 2010-03
The official edition is the current, up-to-date standard according to the Deutsches Institut für Normung (DIN). Some third-party vendors incorrectly mark it as "withdrawn" due to the 2010 edition being considered "historical" in their catalogs; always verify that you are using the 2010 edition (date: 2010-03-01).
, DIN 5464 typically specifies a higher number of teeth, which increases the total contact area and overall load-bearing capacity. Centering Methods: Connections under this standard are typically flank-centered din 5464 standard pdf
Lacking radial components prevents the thin walls of a gear or coupling hub from expanding or bulging under peak stress.
To obtain the official , purchase it from an authorised distributor such as DIN Media , Normadoc , or Standards.ie . Always select the correct language edition and be aware of the standard’s withdrawal status before using it for a new project.
0° (pressure angle), which prevents hub expansion caused by radial forces. This public link is valid for 7 days
The DIN 5464 standard has seen several revisions, with the most notable recent versions being from 1965 and 2010. Official Copies : You can purchase and download the official DIN 5464:2010-03
Below is a developed blog post centered around this standard, its applications, and how to access the official documentation.
The PDF is available in German and English . Some distributors may sell only one language version, so check before ordering. Can’t copy the link right now
Spline Shaft DIN 5464 - 10×36×45Spline Shaft DIN 5464 - 10 cross 36 cross 45
(Width of Spline/Tooth): The thickness of the parallel keys on the shaft or the width of the slots in the hub.
: The total number of parallel teeth (typically ranging from 6 to 10 or more depending on scale).