Skips the next programmed block and resumes on the following one. Phase 4: Modifying and Deleting Schedules
Installation and commissioning must only be performed by qualified electricians.
Electrical installation must only be performed by a qualified individual. Ensure the main power supply is entirely disconnected at the circuit breaker before attempting to wire this device.
Connects to devices that should turn OFF when the timer activates. Step-by-Step Programming Guide
: Multi-position slider bar ( RUN , Clock Face Icon, P ) along with individual day ( 1...7 ), hour ( h ), minute ( m ), and program override keys. Phase 1: Setting Current Time and Day
Ultimate User Guide and Manual for the Diehl Multi-Timer 181 5
He flipped to the section on . The diagram showed the characteristic circular dial, ringed with those tiny, defiant plastic pins.
If the hands are not moving, ensure the timer is connected to power.
Understanding the electrical thresholds of your unit prevents circuit overloads and equipment damage. Specification 230V AC, 50Hz Current Rating 16 Amps (Resistive), 4 Amps (Inductive) Switch Type SPDT (Single Pole Double Throw) Time Cycle Minimum Switching Time 15-minute intervals Mounting Style Panel Mount / DIN Rail Compatible ⚠️ Safety Warnings & Installation
: For a pool pump to run from 08:00 to 12:00, push all segments outward between the 8 and 12 markings on the dial. 3. Set the Manual Override Switch