in the Virtual Terminal:
Use the Virtual Terminal in Proteus to monitor output.
Connect to GND (sets I2C address to 0x76 ) or VCC (sets it to 0x77 ). 4. Running the Simulation bmp280 proteus library
The BMP280 is a popular pressure sensor chip from Bosch Sensortec, widely used in various applications such as weather stations, altimeters, and industrial automation. Proteus is a popular electronics simulation software that allows users to design, simulate, and test electronic circuits.
int32_t compensate_T(int32_t adc_T) // Implement Bosch's compensation formula in the Virtual Terminal: Use the Virtual Terminal
void loop() Serial.print("Temperature = "); Serial.print(bmp.readTemperature()); Serial.println(" *C");
: Connect to the hardware SCL pin of your microcontroller (e.g., A5 on Arduino Uno) with a pull-up resistor. Running the Simulation The BMP280 is a popular
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\Data\LIBRARY Paste the files and restart Proteus. 2. BMP280 Proteus Model Features Interfaces : Supports protocols. Pin Configuration