Connecting this board to a standard aftermarket case requires specific pin placement, as it often uses a proprietary 14-pin layout: Pins 1 (+) and 3 (-). Power LED: Pins 2 (+) and 4 (-). Reset Switch: Pins 5 and 7. Power Switch: Pins 6 and 8. LAN LED: Pins 12 and 14 (if supported by your case). Important Notes Front panel pin installation, help! - Acer Community
: 5 x SATA II 3.0Gb/s connectors (some variants may include a single SATA III port). acer q65h2-am v1.1 manual
If you configure an incompatible setting or forget a BIOS password, you must reset the Complementary Metal-Oxide-Semiconductor (CMOS): Power down the PC and unplug the power cord from the wall. Locate the 3-pin jumper on the motherboard. Connecting this board to a standard aftermarket case
: 6 x USB 2.0, 1 x RJ-45 Gigabit Ethernet, and 3-jack Audio I/O. Хламада Maintenance Links Drivers & Support : Visit the official Acer Support Drivers and Manuals Power Switch: Pins 6 and 8
It looks like there's no response available for this search. Try asking something else. ECS Q65H2-AM (V1.1) - The Retro Web
Here are its key technical specifications:
Beyond understanding the manual, here are some additional tips to enhance your experience with the Acer Q65H2-AM V1.1: